Description
This high-pressure fuel pump is for Lexus models with the 2.0 L turbocharged four-cylinder: GS 200t, GS 300, IS 200t, IS 300 (rear-wheel drive), RC 200t, RC 300 (rear-wheel drive), NX 200t and NX 300. Lexus lists it as “Gas Fuel Tank Pump”, but it is the cam-driven high-pressure pump that feeds the direct-injection rail, not the low-pressure pump inside the tank. When it wears, the engine loses power and may run rough, particularly under boost.
Common signs it needs replacing
- Reduced power or hesitation when you accelerate, especially under load.
- Long cranking or hard starting, particularly when the engine is warm.
- Check Engine light with fuel rail pressure or lean codes, sometimes with a limp mode.
- A ticking noise from the pump that is louder than normal.
Fitment notes
Lexus OEM number 2310136080 for the GS 200t (2016), GS Turbo (2017), GS 300 (2018–2019), IS 200t (2016), IS Turbo (2017), rear-wheel-drive IS 300 (2018–2024), RC 200t (2016–2017), rear-wheel-drive RC 300 (2018–2024), NX 200t (2015–2017) and NX 300 (2018–2021), all with the 2.0 L turbo four. The V6 cars (GS 350, GS 450h, IS 250, IS 350 and all-wheel-drive IS 300) use different pumps. Lexus lists 23101-36090 as the replacement number; compare the number on your pump or confirm with your VIN. Aftermarket replacement, not a genuine Lexus part.
Installation notes
- Relieve the fuel pressure and let the engine cool before touching the pump; a direct-injection rail holds high pressure.
- Fit new seals and the correct torque on the lines; if the pump follower or the camshaft lobe is worn, replace those too.