Description
This secondary air injection pump is listed for Audi 2.0 L four-cylinder and 3.0 L, 4.0 L and 4.2 L engines built between 2012 and 2018, including the A4, A5, A8, S4, S5, S6, S7, S8 and RS7. After a cold start the pump blows fresh air into the exhaust ports for about a minute, burning off unburned fuel and warming the catalyst faster to cut emissions. It runs only briefly, but moisture and heat take their toll, and a failed pump normally shows up as a fault code and an inspection-related issue rather than a drive problem.
Common signs it needs replacing
- Engine light with secondary-air-system codes (for example air flow insufficient) after a cold start.
- A loud buzz, whine or rattle for the first minute after a cold start, or complete silence when it should be running.
- A failed emissions inspection because of the monitor not completing.
- Water or corrosion visible at the pump's connector or housing.
Fitment notes
Listed under Audi OEM number 079959231G for the A4 and A4 Quattro (2016), A5 and A5 Quattro (2012–2016), A8 Quattro (2013–2018, 4.0 L), RS7 (2014, 4.0 L), S4 (2013–2016), S5 (2012–2017, 3.0 L V6 and 4.2 L V8), S6 (2013–2014, 4.0 L), S7 (2013–2015, 4.0 L) and S8 (2013–2018, 4.0 L). The pump is also sold under Bentley numbers, so compare your old unit or check by VIN before ordering. Aftermarket part, not genuine Audi.
Installation notes
- Check the secondary air valve and the hoses for blockage or water damage; a clogged valve will burn out a new pump.
- Inspect the wiring, fuse and relay for the pump.